The HP LaserJet 4000 printer is ideal for a business that needs a monochrome laser printer. An easy to use printer with many features, it offers a power saver that you can program in just minutes and a long-lasting HP 27X toner. It’s easy to set up and offers reliable speed and high resolution.
This printer has a fast start with just 12 seconds to begin a print job. It has a high print speed at 17 ppm. It comes set to a 600 x 600 dpi resolution with 220 levels of gray scale. This will deliver quality documents. For even finer resolution it can be changed to 1,200 x 1,200 dpi. This will affect the number pages per minute printed. The toner is HP precision which allows for clean, clear printing. Its HP 4000 replacement toner prints 10,000 pages. The printer itself is capable of handling a large capacity of work. Its duty cycle is 65,000 pages per month.
The printer paper tray will hold a whole ream of paper, 500 sheets. The feeder tray holds another 100 sheets of paper or 75 envelopes. A total storage of 600 sheets. If duplex printing is needed there is an optional duplex tray. There is also an additional paper tray that holds 500 sheets that is available. That would be a total of 1,100 sheets ready for printing before needing to add paper again. The output tray has sensor so you are aware of when the 250 sheet tray has been filled.
There is an output tray in the rear of the printer. This is where those things printing from the feeder tray output. It holds 50 sheets. With the two different trays you can print more than one size document. It can print several different size pages. As small as 3 x 5 and as large as 8.5 x 14 and can handle paper from 16 to 53 lbs.
The printer has a 100 MHz processor. It is capable of network printing with two EIO slots to connect to the business network. It has an internal 4 MB memory. The memory is expandable up to 100 MB. Three DIMM (dual in line memory module) slots will hold 4, 8, 16 or 32 MB of RAM. With more memory print jobs will process more quickly, eliminating any back ups.
The Windows and Mac operating systems both work with this printer. Flash memory can also be used with the printer. It is used for fonts, forms and signatures. There are two slots for the flash memory. They hold either 2 MB or 4 MB. Serial and parallel ports are available, as well as a 10/100 Ethernet interface.
This printer is relatively light at 39.27 pounds. It is 16.77 inches long, 15.4 inches wide and 13.3 inches high. If the duplex or second paper tray option is added, the height is then 18 inches. This is still compact enough to sit on a desk top.